Elmo Image Mate 4 Manual page 13

Scene mode
Priority mode
●Camera Settings
Item
Brightness
Contrast
Hue
Saturation
Sharpness
Gamma
White Balance
※1
Focus
※1
Exposure
※1
Noise reduction
※1
Power Line
Frequency
Backlight
compensation
Low light
compensation
Anti-flicker
※1 If you remove the tick from the check box of "Auto" ☑at the right of the setting items,
you can set the value as you wish.
＊ The Camera mode settings and Camera settings will be initialized when the Default
button is pressed.
Normal To clearly display photos or documents with color.
Document To clearly display text documents.
Binned The speed takes precedence over image quality.
Resized The image quality takes precedence over speed.
Setting range
To adjust the brightness. It does not follow
0～12
the brightness of the shooting environment.
To adjust the level of contrast of texts and
0～20
lines.
-180～180 To adjust the color tone of the image.
0～31 To adjust the saturation of the image.
5～15 To adjust the clarity of the image.
To adjust the image characteristics of the
100～200 input/output devices. Adjust the value
according to your preference.
To adjust the level of red color and blue color
2000～8000
in the image manually.
100～3000 To adjust the focus.
To adjust the exposure level.
※If you remove the tick from the check box
-10～1
of "Auto", the above brightness setting will
be disabled.
0～10 To adjust the level of noise reduction.
When you notice a light flickering, set this
50Hz
value same as the power frequency of your
60Hz
area.
To prevent the object in the center of the
On
image from becoming dark when there is a
Off
strong backlight behind the object.
When this setting is set to On, the camera
On
automatically selects the appropriate
brightness for the shooting in dark
environment or in an environment where the
Off
brightness changes abruptly.
On
To reduce the flickering in the image by
adjusting the brightness.
Off
Description
13