5
Remove all packaging material
of the new NanoCloud rotary
humidification wick (fig. ‹).
6
Place the new NanoCloud rotary
humidification wick in the wick
wheel, and then fasten the locks on
the wick wheel (fig. Œ).
7
Place the wick wheel on the wick
support (fig. k).
Note
•
When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
8
Place the water tray and water tank
back into the appliance.
9
Touch and hold the reset button
for 3 seconds to reset the
NanoCloud rotary humidification
wick lifetime counter (fig. ƒ).
EN
13