Siemens SIMATIC S7-400 Reference Manual page 321

● at current outputs
Voltage output
● Short-circuit protection
● Short-circuit-current
current output
● No-load voltage
Destruction limit against externally applied voltages / currents
● Voltage at the outputs against MANA
● Current
Connection of actuators
● for voltage output
● for current output
S7-400 Automation System Module Data
Reference Manual, Ausgabe 11/2016, A5E00850736-08
5.26 Analog output module SM 432; AO 8 x 13 Bit (6ES7432-1HF00-0AB0)
– inductive load
– 2-wire connection
– 4-wire connection (measurement cable)
– 2-wire connection
max. 500 Ω
600 Ω at reduced U to < 1 V
CM
max. 1 mH
Yes
Maximum 30 mA
max. 19 V
max. 20 V continuous
75 V for1 ms (duty cycle 1:20
max. 40 mA continuous
possible, without compensation of line resis‐
tances
Possible
Possible
Analog modules
321