Sinclair GSH-60IRA Manual page 24

AIR-TO-WATER HEAT PUMP
Note: 1. In heating or cooling mode, you can select room temperature or outflow water temperature
2. In sanitary heating mode, you can select sanitary water tank temperature and solar leaving
water temperature (solar kit is installed)
3. Room temperature setting is available when you have selected room temperature as control
target. Please refer function code 01.
4. In heating mode, if weather depending mode is activated, you can't set the room temperature or
outflow water temperature.
In heating mode , there are two Heating operation level:
high temperature cycle
low temperature cycle
please refer to In function code 19 ;
3. Adjust desired temperature by pressing
Note: 1 : Increase 1°C or 1°F for each press.
2 : Decrease 1°C or 1°F for each press.
4. Press
menu.
The range of the setting temperature
Temperature
Outflow water temperature （ NO
FCU）
button to save the setting target temperature and return to the main
button.
Mode
cool
18
CONTROL PANEL MENU
(unit:
Temperature range
7~25(default:7)
)
℃