AIR-TO-WATER HEAT PUMP
3.12 Timing Temperature
● When the wired controller shows the main interface, press "Timer set" & "Temp set" for 5
seconds to enter timing temperature setting interface. When the setting is finished, the
icon
will flashing;
● When the Timing Temperature setting is succeed ,press "Timer set" & "Temp set" for 5
seconds to cancel the Timing Temperature.
● Steps for setting timing temperature
Step 1: Select timing temperature mode
Selection of timing temperature mode: the last timing temperature mode is defaulted.
Heat mode is defaulted upon first energization. Press "▲" and "▼" button to select timer
mode, including heating and cooling. Press "Set" button to save the selection. Then
timing temperature function is set successfully.
42
CONTROL PANEL MENU