AIR-TO-WATER HEAT PUMP
1. Press
enter engineer function setting mode. Icon
2. Press
button to select the function code that you want to set.
3. Press
parameter is flashing.
4.
Press
button to adjust
5.
button to save the desired parameter.
Press
6. Repeat step 2 to 5 to set other function parameter, or press
button to return to the main menu.
Code
Function description
Setting interval of defrost
1
mode
Setting duration of defrost
2
mode
Setting enter temperature
3
of preventing freezing
operation
Setting exit temperature of
4
preventing freezing
operation
Setting enter temperature
5
of anti-high temperature
operation
Setting exit temperature of
6
anti-high temperature
operation
Setting enter temperature
7
of defrost operation
Setting exit temperature of
8
defrost operation
3.6 Set target temperature
and
buttons at the same time and hold on 5 seconds to
button to enter function parameter setting mode. The function
desired parameter.
The table of user function parameter
/
/
/
/
/
/
/
/
will display
Detail
16
CONTROL PANEL MENU
.
button or
Range
30~60minute(default:50)
1~15minute(default:10)
1~5 (default:3 )
℃
℃
6~14 (default:12 )
℃
55~60 (default:58 )
℃
40~54 (default:5
3 )
℃
-10~0 (default:
-4 )
℃
5~30 (default:15 )
℃
℃
℃
℃
℃
℃