Changing Seasonal Adjust; Using The Global Setting; Using A Program Specific Setting (Set Season Adjust By Program); Timed Delay Between Stations - Hunter ACC-1200 Manual

nOte: If the ACTUAL value is different from the
PROGRAMMED value, Seasonal adjust has been changed
from the default of 100% to a new value. The actual run
time is the duration the station will water.
Press the Information button with any station selected at
the Set Station Run Times dial position to see a summary
of all watering for a specific station, including all
programs in which it will run.

ChAnGInG SeASOnAl ADjuSt

Season adjust is used to make global or program specific
run time changes without the need to reprogram every
station's run time. Seasonal adjust made at the controller
level is global (GLBL) , and the controller can be adjusted
in 1% increments, from 1 to 300%. This will change run
times by the set percentage.
For example, a 10 minute run time that is adjusted to 70%
will run for 7 minutes. When the controlleris set back to
100%, the station will return to a 10 minute run time.
Programs that are set to GLBL will use the Global Seasonal
Adjust setting that has been set for the controller.
It is also possible to set Seasonal Adjust percentages for
individual programs (also 1–300%). The programs will
use their own percentages and will not be affected by the
controller-level Global Setting. The percentages are not
multiplied together. If the controller is set to 150%, but
an individual program is set to 70%, the stations in the
programs will run for 70% of the original run time, not
70% x 100%.
22
Turn the dial to the SET STATION RUN TIMES position.

Using the Global Setting

1. Press the left arrow button until the cursor is on
the percentage below the GLBL. The percentage
immediately below GLBL is the seasonal adjustment
percentage for the entire controller.
2. Press the + and – buttons to adjust the global
seasonal adjust value between 0 and 300%.
Using a Program Specific Setting (set Season Adjust by
Program)
1. Press the left arrow button until the cursor is on the
GLBL.
2. Press the + and – buttons to adjust the season adjust
value between 0 and 300%.
NOTE: If it is desired to return to the global season
adjust, move the cursor to the season adjust
percentage then use the + and – buttons to change
the value to GLBL. GLBL is located between the 101
and 100% positions.

Timed Delay between Stations

Programming this feature is explained in the Extended
Features section.

SettInG DAyS tO WAter

Each Program's days to water are programmed at this
position.

Set Days to Water

1. Turn the dial to the SET DAYS TO WATER position
2. Select the Program (A – F) by pressing the Program
button
3. Press the + or – buttons to change from DAYS (day of
the week), INTERVAL (1 – 31 DAYS), or ODD or EVEN
days of the month.