Web Filtering - Cisco RV260 series Administration Manual

Web Filtering

Web Filtering
Web filtering is a feature that allows you to manage access to inappropriate websites. It can screen a client's
web access requests to determine whether to allow or deny that website. To enable and configure the web
filtering, follow these steps:
Step 1 Click Security > Web Filtering.
Step 2
On the Web Filtering section, select On.
Step 3 Enter the URL to validate in the URL Lookup and click Lookup.
Step 4
Click Apply.
Step 5 Under the Web Filtering Policies table, click Add. To edit an existing policy and click Edit to modify it.
Step 6
On the Web Filtering – Add or Edit Policy page, enter the following information:
Policy Name
Description
Enable
Category
Web Reputation
Applied on IP Group
RV260x Administration Guide
104
Specify a name for the web filtering policy you are creating.
Enter a description for the policy.
Check Enable to activate the policy.
Click Edit and select the desired Filtering Level (select the appropriate web categories
to be filtered). Choose High, Medium, Low, or Custom to quickly define the filtering
extent. You can also choose the items from the Adult or Mature Content, business
orInvestment, Entertainment, Illegal or Questionable, IT Resources, Lifestyle or Culture,
Other and Security categories. The incoming URL belonging to the selected items are
blocked.
Click OK to go back to Web Filtering – Add or Edit Policy page.
You can see the selected web content listed in the Application List Table under Category.
Check Web Reputation to enable the web reputation analysis.
You can select an IP group from the drop down list to which this policy is applied.
Security