Led And Beeper Indications - Datalogic Gryphon GM44XX Quick Reference Manual

LED and Beeper Indications

LED and Beeper Indications
The reader's beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional "Green Spot" also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader's func-
tions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Indication Description
Power-up
Beep
Good Read
Beep
ROM Failure
Limited
Scanning
Label Read
Reader
Active Mode
44
The reader is in
the process of
powering-up.
A label has been
successfully
scanned by the
reader.
There is an error
in the reader' s
software/pro-
gramming
Indicates that a
host connection
is not estab-
lished when the
IBM or USB inter-
face is enabled.
The reader is
active and ready
to scan.
LED
N/A
LED behavior for
this indication is
configurable via
the feature
"Good Read:
When to Indi-
cate"
(see the PRG for
information.)
Flashes
N/A
The LED is lit
a
steadily
Beeper
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
The reader will
beep once at
current fre-
quency, volume,
mono/bi-tonal
setting and
duration upon a
successful label
scan.
Reader sounds
one error beep
at highest vol-
ume.
Reader ' c hirps'
six times at the
highest fre-
quency and cur-
rent volume.
N/A
Gryphon™ I GM44XX