Connecting The Base Station; Securing The Dc Power Cord (Optional) - Datalogic Gryphon GM44XX Quick Reference Manual

Connecting the Base Station

Connecting the Base Station
Figure 4 shows how to connect the Base Station to a ter-
minal, PC or other host device. Turn off the host before
connection and consult the manual for that equipment (if
necessary) before proceeding. Connect the interface cable
before applying power to the Base Station.
The Gryphon GM44XX can also be Powered by
the Terminal. When powered by the Terminal,
the battery charger is automatically set as Slow
charge.
For some specific interfaces or hosts or lengths
of cable, the use of an external power supply
may be recommended for full recharging capa-
bility (see
more details).
Base Station Connection and Routing —
Power Cable and Interface (I/F) Cable connectors into their
respective ports in the underside of the Base Station.
Then connect to an AC Adapter, and plug the AC power
cord into the (wall) outlet.
Figure 4. Connecting the Base Station

Securing the DC Power Cord (Optional)

The DC power cord for the adapter can be secured to the
bottom of the base in order to maximize the mechanical
retention of the cable itself. The routing of the power cord
can be changed to accommodate base station positioning:
6
"Technical Specifications" on page 39
I/F Cable
DC Power
Cord
Base
Station
Fully insert the
Wall plug
Connector
AC/DC
Adapter
Gryphon™ I GM44XX
for