Reading Parameters
Standard Product Default Settings
Reading Parameters
Point the reader at the target and pull the trigger to
enable the aiming system and the illuminator (red beam)
to capture and decode the image. The aiming system will
briefly switch off during the acquisition time and if no
code is decoded will switch on again before the next
acquisition. The illuminator will remain on until the sym-
bol is decoded.
As you read code symbols, adjust the distance at which
you are holding the reader.
Aiming System
A number of options for customizing control of the Aiming
System are available. See the PRG for more information
and programming bar codes.
34
Gryphon™ I GM44XX