Updating Firmware; Signed Cmc Firmware Image; Downloading Cmc Firmware; Viewing Currently Installed Firmware Versions - Dell PowerEdge FX2 User Manual

Updating firmware

You can update firmware for:
• The CMC
• Chassis infrastructure
• I/O Module
You can update firmware for the following server components:
• BIOS
• iDRAC7
• iDRAC8
• Lifecycle Controller
• 32–bit diagnostics
• Operating system Drivers Pack
• Network Interface Controllers
• RAID controllers

Signed CMC firmware image

The CMC firmware includes a signature. The CMC firmware performs a signature verification step to ensure the authenticity of the
uploaded firmware. The firmware update process is successful only if CMC authenticates the firmware image to be a valid image
from the service provider and has not been altered. The firmware update process is stopped if CMC cannot verify the signature of
the uploaded firmware image. A warning event is then logged and an appropriate error message is displayed. The firmware update
includes upgrade and downgrade.

Downloading CMC firmware

Before beginning the firmware update, download the latest firmware version from support.dell.com, and save it to your local
system.
It is recommended to follow the following update order while updating firmware for the chassis:
• Blade components firmware
• CMC firmware
• Chassis infrastructure firmware

Viewing currently installed firmware versions

You can view the currently installed firmware versions using the CMC web interface or RACADM.

Viewing currently installed firmware versions using CMC web interface

In the CMC web interface, go to any of the following pages to view the current firmware versions:
• Chassis Overview → Update
38
4