Dell PowerEdge FX2 User Manual page 96

where <email name> is the name of the person or group receiving the email alert, and <index> is the index value specified
in step 4 and step 5. The email name can contain up to 32 alphanumeric characters, dashes, underscores, and periods. Spaces
are not valid.
6. Setup the SMTP host:
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain
where host.domain is the FQDN.
You can configure up to four destination email addresses to receive email alerts. To add more email addresses, repeat step 2 –
step 5.
NOTE: The commands in steps 2–5 overwrite any existing settings configured for the index you specify (1–4). To
determine whether an index has previously configured values, type:xracadm getconfig -g cfgEmailAlert
— I <index> . If the index is configured, values appear for the cfgEmailAlertAddress and cfgEmailAlertEmailName
objects.
For more information, see the RACADM Command Line Reference Guide for iDRAC and CMC available at dell.com/support/
manuals.
96