Downloading And Updating Cmc Firmware; Setting Chassis Physical Location And Chassis Name; Setting Date And Time On Cmc - Dell PowerEdge FX2 User Manual

Chassis management controller
Hide thumbs Also See for PowerEdge FX2:
Table of Contents

Advertisement

To configure Internet Explorer to play animations:
1.
Start Internet Explorer.
2.
Click Tools → Internet Options → Advanced.
3.
Go to the Multimedia section, and then select the Play animations in web pages option.

Downloading and updating CMC firmware

To download the CMC firmware, see
To update the CMC firmware, see

Setting chassis physical location and chassis name

You can set the chassis location in a data center and the chassis name to identify the chassis on the network (default name is cmc-
"Service Tag"). For example, an SNMP query on the chassis name returns the name you configure.
Setting chassis physical location and chassis name using web interface
To set the chassis location and chassis name using the CMC web interface:
1.
In the left pane, go to Chassis Overview, and then click Setup.
2.
On the General Chassis Settings page, type the location properties and the chassis name. For more information about setting
chassis properties, see the CMC Online Help.
NOTE: The Chassis Location field is optional. It is recommended to use the Data Center, Aisle, Rack, and Rack Slot
fields to indicate the physical location of the chassis.
3.
Click Apply. The settings are saved.
Setting chassis physical location and chassis name using RACADM
To set the chassis name, location, date, and time by using the command line interface, see the setsysinfo and setchassisname
commands.
For example racadm setsysinfo —c chassisname or racadm setsysinfo —c chassislocation
For more information, see the Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference
Guide.

Setting date and time on CMC

You can manually set the date and time, or you can synchronize the date and time with a Network Time Protocol (NTP) server.
Setting date and time on CMC using CMC web interface
To set the date and time on CMC:
1.
In the left pane, click Chassis Overview → Setup → Date/Time.
2.
To synchronize the date and time with a Network Time Protocol (NTP) server, on the Date/Time page, select Enable NTP
and specify up to three NTP servers. To manually set the date and time, clear the Enable NTP option, and then edit the Date
and Time fields.
3.
Select the Time Zone from the drop-down menu, and then click Apply.
Setting date and time on CMC using RACADM
To set the date and time using the command line interface, see the config command and cfgRemoteHosts database property
group sections in the Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide
available at dell.com/support/manuals.
For example racadm setractime -l 20140207111030.
To read the date and time use racadm getractime command.
Downloading CMC
Firmware.
Updating CMC
Firmware.
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fx2s

Table of Contents