Additional Faults - Interroll MultiControl User Manual

Additional faults

Fault
The MultiControl is not
working or is working
incorrectly
The MultiControl is defective
or damaged
RollerDrive does not rotate
42
Interroll MultiControl
Troubleshooting
Possible cause
No or insufficient power supply
Internal fuse triggered or faulty.
RollerDrive not or not correctly inserted or
RollerDrive defective
Brake chopper overheats: The application
feeds back too much energy or the voltage
supply is too high
Remedy
4 Check whether the output voltage of the
power supply is within the specified voltage
range.
4 Check the connections and correct if
necessary.
4 Replace the MultiControl.
4 Check whether the power supply is within the
specified voltage range.
4 Check the connections and correct if
necessary.
4 Replace the RollerDrive if necessary.
4 Allow to cool down.
4 Lower ambient temperature if necessary.
4 Check voltage supply and set to 24 V if
necessary.
Version 2.3 (01/2017) en-US
Translation of original instruction manual