Genie TMZ-50/30 Service Manual page 46

Section 3 • Scheduled Maintenance Procedures
800-610-4101
ActionRental.com
CHECKLIST B PROCEDURES
5 Before serial number T5002-25: Press the
function enable button and any boom function
button, and check the engine rpm on the gauge.
Refer to Section 2, Specifications.
After serial number T5002-24: Press the
function enable button and any boom function
button and hold the engine start button BN77 at
the platform controls, and check the engine rpm
on the diagnostic display at the side of the
ground controls. Refer to Section 2,
Specifications.
If high idle rpm is correct, disregard
adjustment step 6.
6 Honda models: Loosen the nut on the
solenoid. Turn the high idle adjustment nut
counterclockwise to increase the rpm or
clockwise to decrease the rpm. Tighten the jam
nut and repeat this procedure beginning with
step 5.
Hatz models: Loosen the lock nut on the
solenoid. Turn the high idle adjustment nut
counterclockwise to increase the rpm or
clockwise to decrease the rpm. Tighten the lock
nut and repeat this procedure beginning with
step 5.
3 - 24 TMZ-50/30
June 2005
REV B
Part No. 65162