VisualSonics VEVO Operator's Manual page 35

V1.0 VisualSonics Vevo Compact Anesthesia System Operator Manual
Need help? Call us toll-free: 1-866-416-4636 or E-mail us: support@visualsonics.com
Place Animal #1's nose in the mouse mask.
12.
When the procedure on Animal #1 is complete, close the stopcock in
13.
the mouse mask line and place Animal #1 in a recovery unit. That animal
will begin to awaken in approximately two minutes.
Repeat steps 4 through 11 with Animal #2, and all remaining models,
14.
until all procedures have been completed.
Turn the vaporizer dial to the "OFF" position.
15.
Turn off the oxygen flowmeter.
16.
If you are using a freestanding oxygen tank, turn off the oxygen at the
17.
tank. We also recommend you choose to keep open the Y-tube's stopcock
to the induction chamber, and close the stopcock to the mouse mask.
Clean and sanitize the induction chamber and mouse mask as
18.
outlined in your procedure area cleaning protocols.
Chapter 5: Anesthetizing a Mouse: Inducing anesthesia
25