Ricoh Priport VT 6000 Service Manual page 81

29 January 1998
Output Check Table
Code LCD Display
2 MOTOR: ADF Drive
3 MOTOR: Master Eject
4 MOTOR: Pressure Plate
Up/Down
5 MC: Master Reverse Roller
6 MOTOR: Vacuum
7 MOTOR: Air Knife
8 SIG: Key Counter
9 COUNTER: Master
10 COUNTER: Paper
11 SOL: Paper Separation
Release
12 SOL: Ink Supply
13 SOL: Drum Lock
14 SOL: Paper Feed/Print
Pressure
15 SOL: Master Feed Clamper
16 SOL: Master Eject Clamper
17 SOL: Master Eject
18 RELAY: Paper Table Down
19 RELAY: Paper Table Up
20 RELAY: Main Motor
Reverse
21 SIG: Fluorescent Lamp
22 MOTOR: Cutter
+ Direction
23 MOTOR: Cutter
— Direction
24 MOTOR: Image Shift
+ Direction
Turns on the ADF drive motor.
Out- 2
Turns on the master eject motor.
Out- 3
Turns on the pressure plate up/down motor.
Out- 4
Turns on the master reverse roller magnetic
Out- 5 clutch.
Turns on the vacuum fan motor.
Out- 6
Turns on the air knife motor.
Out- 7
Increments the key counter.
Out- 8
Increments the master counter.
Out- 9
Increments the total counter.
Out-10
Turns on the separation plate release
Out-11 solenoid.
Turns on the ink supply solenoid.
Out-12
Turns on the drum lock solenoid.
Out-13
Turns on the paper feed solenoid and the
Out-14 printing pressure solenoid.
Turns on the master feed clamper solenoid.
Out-15
Turns on the master eject clamper solenoid.
Out-16
Turns on the master eject solenoid.
Out-17
Turns on the paper table drive motor
Out-18 (down).
Turns on the paper table drive motor (up).
Out-19
Turns the drum in the direction opposite to
Out-20 the printing direction.
Turns on the exposure lamp if the Print key
Out-21 is pressed. Turns off the lamp if the Print
key is pressed again.
Turns on the cutter motor (moves it to the
Out-22 rear of the machine).
Turns on the cutter motor (moves it to the
Out-23 front of the machine).
Turns the image position motor in the "+"
Out-24 direction.
4-41
SERVICE PROGRAM MODE
Description