29 January 1998
6. Slide the scanner unit to the left (as seen from the operation side) and remove
the two strips of tape securing the master box.
[F]
7. Open the paper delivery table and remove the strip of tape [E] protecting the
end fence.
8. Remove the cardboard [F] under the scanner unit.
9. Open the scanner unit and change the position of screws [G] from the transport
position to the operating position.
10. Open the doors (2 strips of tape [H]) of the optional table and take out the
plastic bag containing 2 screws.
[G]
[H]
[E]
C223I503.PCX
3-7
INSTALLATION PROCEDURE
C223I504.PCX