Ricoh Priport VT 6000 Service Manual page 66

SERVICE PROGRAM MODE
No. Display
131 Output Check
Mode
132 All Indicators ON Turns on all the
133 Sorter Cleaning
Mode
133-1 Sorter Cleaning
Mode
(1st Sorter)
133-2 Sorter Cleaning
Mode
(2nd Sorter)
135 SN: 1st Paper
Exit
136 SN: 2nd Paper
Exit
137 SN: Master Eject Displays the master
138 SN: Drum Master Displays the drum
140 Ink Detection
141 Paper Detection
** Size Detection
141-1
Function
Turns on the electrical
components.
indicators on the
operation panel.
In this mode, one bin
shift is carried out
when the Print Start
key is pressed. First,
select the 1st sorter or
2nd sorter.
1. When the Print Start
key is pressed once,
the bin returns to the
home position.
2. Each time the Print
Start key is pressed
after this, one bin
shift is carried out.
When the 20th bin
shift is done, the bins
return to the home
position.
1.When the Print Start
key is pressed once,
the bin returns to the
home position.
2. Each time the Print
Start key is pressed
after this, one bin shift
is carried out.
When the 20th bin
shift is done, the bins
return to the home
position.
Displays the 1st paper
exit sensor voltage.
Displays the 2nd paper
exit sensor voltage.
eject sensor voltage.
master sensor voltage.
Specifies whether ink
detection is done.
Specifies whether
paper end detection is
done.
Specifies whether
paper size detection is
done or not.
4-26
Data Factory
1: 1st Sorter
2: 2nd Sorter
0: No
1: Yes
0: No
1: Yes
0: Yes
1: No size
detection
29 January 1998
Comments
Setting
See the output
check table.
Press the # key
to light all the
indicators.
1 Depending on
the number
selected in this
mode, the
machine goes to
133-1 or 133-2.
Unit: Volts
Unit: Volts
Unit: Volts
Unit: Volts
1
1
0 If "0" is selected
in this mode, the
machine goes to
142-2.