Ricoh Priport VT 6000 Service Manual page 72

SERVICE PROGRAM MODE
8) SP Mode No. 95 — Scanner Free Run
x
It is possible to change the first scanner speed by changing the
magnification ratio:
25 to 200 % (Maximum speed = 25 %)
x
To start the scanner free run, press the Print Start key after selecting "Lamp
On/Off" using the # key.
Input a magnification ratio if you wish to change the first scanner speed,
before you press the Start key. (Factory setting = 25 %)
x
To stop the scanner free run, press the Stop key. The scanner returns to
home position, then stops.
x
The machine does not exit SP mode until the scanner returns to home
position correctly.
9) SP Mode No. 96 — ADF Original Feed Check
x
It is possible to change the original feed speed by changing the
magnification ratio:
25 to 200 % (Maximum speed = 25 %)
x
To start original feed, press the Print Start key after placing originals in the
ADF.
Input a magnification ratio if you wish to change the original feed speed,
before you press the Start key. The ADF starts feeding until all originals are
fed.
x
To stop feeding, press the Stop key. The original stops at this moment.
x
If the original feed fails, or if the Stop key is pressed, the "A + Jam" indicator
turns on.
If the jammed originals are removed from the ADF, the jam indicator turns off
and the failure is reset.
x
The machine does not exit SP mode during feeding.
10) SP Mode No. 118 — Print Size Count
x
The print size counter indicates the following paper sizes:
A4 version
x
A3
x
B4
x
A4 Landscape
x
A4 Portrait
x
B5 Landscape
x
B5 Portrait
x
* (Others)
LT version
x
DLT
x
LT
x
LT Landscape
x
LT Portrait
x
HLT
x
* (Others)
4-32
29 January 1998