Ricoh Priport VT 6000 Service Manual page 12

29 January 1998
No. Item
15 New SP Modes
16 New Input/Output Check
Mode
MAJOR DIFFERENCES BETWEEN THE C223 AND THE C228
The default setting for the thermal head energy for
the economy mode (SP35-2) has been changed
from -35% to -30%. (In other words, the energy
used in economy mode has been increased.)
The following SP modes are new for the C228:
SP51: Clear Multi Copy
SP52: Compress W Start Key
SP78-1: Letter/Pht Mode [CS]
SP78-2: Clear/Original
Note: SP51 and SP78 are accessible to users. SP78
also can be registered in CS mode.
- Functions -
SP51: Resets the Combine 2 Originals or
Combined Print function (if it has been set) after the
master making process. There are two options: 0:
No, 1: Yes. "0" is the default.
SP52: The masters in the master eject box can be
compressed every time the Master Making key is
pressed. There are two options: 0: No, 1: Yes. "0"
is the default.
Note: If this mode is enabled, it reduces the
possibility of the master eject belts slipping off, which
tends to occur when the master box is full.
SP78-1: Select whether the reproduction of letter
mode areas is emphasized when Letter/Photo
mode is used. There are two options: 0: Standard,
1: Emphasized. "0" is the default.
SP78-2: Select whether the image mode (letter,
photo, or letter/photo) is to be returned to the
default setting when master making is finished.
There are two options: 0: No, 1: Yes. "0" is the
default.
The following are the new items for the Input/Output
Check Mode:
Input: 51
Input: 52
Output: 42
on
1-7
Details
SN: Paper Registration
(Paper Registration Sensor)
SN: T. Head Position
(Thermal Head Pressure Release
Sensor)
MOTOR: T. Head Up/Down (Turns
the thermal head pressure release
motor.)