Ricoh Priport VT 6000 Service Manual page 63

29 January 1998
No. Display
85 Initial Com-
pression
86 A3 Drum 2 Count
Up
**87 Memory Print
**88 Auto Memory/
Class
**89 Gray/Tint Mode
90 Thermal Head
Test
91 Command Sheet
Check
92 Thermal Paper
Mode
93 Erase Area
Check
95-1 Scanner Free
Run
95-2 Scanner Free
Run
96 ADF Original
Feed Check
Function
Specifies whether full
master box detection
is made at power-up.
Specifies whether the
counter increments by
two counts per print
when the A3 drum is
used.
Specifies the printing
operation when in
Memory mode.
Specifies whether Auto
Memory/Class mode is
used.
Select "Yes" to make a
"Tint" image. (If "Tint"
mode is selected, the
Screen, Contrast, and
Image Density keys
are not available.)
Selects the
background pattern for
the copy made in the
thermal head test;
performs the test.
Prints the command
sheet image
(designated area)
together with the
original image.
Use this mode to test
the thermal head.
Checks the erase
area.
Selects the type of
scanner free run.
Carries out the
scanner free run.
(The speed can be
changed: see
Remarks (8).)
Carries out the ADF
original feed check.
(The speed can be
changed; see
Remarks (9).)
4-23
SERVICE PROGRAM MODE
Data Factory
Setting
0: No
1: Yes
0: No
1: Only the
Ricoh,
master counter
AB Dick
2: Both the
master and the
copy counter
NRG
0: Memory
1: Stack
0: No
1: Yes
0: No
1: Yes
1 to 40
51 to 90
101 to 140
151 to 190
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: With the
lamp off
1: With the
lamp on
Start with the
Print Start key.
Stop with the
Stop key.
Start with the
Print Start key.
Stop with the
Stop key.
Comments
0
0 See Remarks
(3)
2
0 See Remarks
(4).
1 See Remarks
(5).
0
7 See the Thermal
Head Test
section.
0 See the
Command
Sheet Check
section.
0 See Remarks
(6)
0 See Remarks
(7)
0 See Remarks
(8)
Displays when
pressing # after
selecting 0 or 1
in 95-1.
See Remarks
(9)