Ricoh Priport VT 6000 Service Manual page 59

29 January 1998
No. Display
37-1-0 Std (setting for
the normal tone)
37-1-1 Lt (setting for the
light tone)
37-1-2 Dk (setting for
the dark tone)
38 ADF Scan Line
Adjust
39 Image Center
Adjustment
39-0 Image Center
Adjustment:
Scanner
39-1 Image Center
Adjustment:
ADF
*40 Original
*41 Image Density
42 Print Speed
*43 Auto Cycle Mode Specifies whether Auto
Function
Adjusts the shadow
erase threshold for the
Normal contrast
setting in Photo mode.
There are four
numbers and each
represents the
threshold value for an
image density. Input
the required value for
the one that is blinking,
then press Enter to
move the next one.
Adjusts the shadow
erase threshold for the
Light Tone contrast
setting in Photo mode.
Adjusts the threshold
value for shadow
erase of the Dark tone
contrast in Photo
mode.
Adjusts the ADF
scanning start
position.
Adjusts the center
position of copies in
the ADF and platen
modes.
Adjusts the center
position of copies in
platen mode.
Adjusts the center
position of copies in
ADF mode.
Specifies the image
mode at power-up.
Specifies the image
density at power-up.
Specifies the printing
speed at power-up.
Cycle mode is selected
at power-up.
4-19
SERVICE PROGRAM MODE
Data Factory
Setting
Lt: 0 to 63 Lt: 24
Std: 0 to 63 Std: 15
Dk: 0 to 63 Dk: 11
Dkr: 0 to 63 Dkr: 4
Lt: 0 to 63 Lt: 31
Std: 0 to 63 Std: 24
Dk: 0 to 63 Dk: 15
Dkr: 0 to 63 Dkr: 9
Lt: 0 to 63 Lt: 12
Std: 0 to 63 Std: 7
Dk: 0 to 63 Dk: 5
Dkr: 0 to 63 Dkr: 2
-4.9 to 4.9 mm
0: Scanner
1: ADF
-4.9 to 4.9 mm
-4.9 to 4.9 mm
0: Photo
1: Line
2: Line/Photo
0: Light
1: Standard
2: Dark
3: Darker
0: 60 rpm
1: 75 rpm
2: 90 rpm
3: 105 rpm
4: 120 rpm
0: No
1: Yes
Comments
0 0.1 mm steps
See remarks
(1).
0 See remarks
(2).
0 0.1 mm steps
0 0.1 mm steps
1
1
2
0