Ricoh Priport VT 6000 Service Manual page 36

29 January 1998
13. Open the paper feed table [A] and neatly
stack some printing paper on the table.
14. Slide the paper feed side plates [B] gently up
against the paper stack.
15. Open the paper delivery table [C] and adjust
the position of the end plate [D] and the side
plates [E] to match the printing paper size.
Refer to the paper size scale on the table.
16. Install the ink cartridge [F].
1) Open the front door and lower the ink
holder [G].
2) Remove the ink cartridge cap.
3) Insert the ink cartridge in the ink holder
and raise the ink holder to the original
position.
4) Close the front door.
17. Slide the scanner unit all the way to the left,
and take the master spools [H] out.
INSTALLATION PROCEDURE
[B]
[E]
[D]
[C]
3-9
[A]
C223I506.PCX
C228v000-2.WMF
[F]
C223I508.PCX
[G]
[H]
C223I514.wmf