Ricoh Priport VT 6000 Service Manual page 48

SERVICE TABLES
Code
E-12
E-13
E-14
Sorters
E-21
E-26
E-27
Problem
1. The upper or lower pressure plate
sensor remains activated for more
than 4 seconds after the pressure
plate motor starts turning.
2. The lower pressure plate sensor is
not activated within 8 seconds of the
pressure plate motor starting to turn
even though the upper pressure
plate sensor is de-activated.
3. The upper pressure plate sensor is
not activated for more than 8
seconds after the pressure plate
motor starts to turn even though the
lower pressure plate sensor is de-
activated.
1. During scanner initialization:
The home position sensor
remains activated for more than 4
seconds.
The home position sensor is not
activated within 2 seconds.
2. The home position sensor is not
activated within 7 seconds when the
scanner returns after finishing
making the master or scanning.
EMF sorter communication error.
The 1st transport motor speed is
abnormal.
The 1st sorter helical wheel H.P.
sensor status does not change even if
the bin shift motor drive signal is
applied.
The bin shift motor rotation sensor
status does not change even if the bin
shift motor drive signal is applied.
The 1st sorter jogger bar H.P. sensor
status does not change even if the
jogger bar motor drive signal is applied.
Pressure plate drive
mechanism malfunction.
1) Defective home position
2) Scanner motor lock
1) Defective 1st transport
2) Defective 1st transport
1) Defective bin shift motor
2) Defective helical wheel
3) Defective bin shift motor
1) Defective jogger bar
2) Defective jogger bar H.P.
4-8
29 January 1998
Possible Causes
sensor
motor
motor rotation sensor.
H.P. sensor
rotation sensor
motor
sensor