Eaton 9140 Installation Manual page 38

INSTALLATION
Figure 19. Installing the UPS Front and Rear Mounting Brackets
22 ®
Eaton 9140 (9910-E82/E83) UPS Installation Guide for IBM
www.eaton.com/ibm
10. If the front and rear mounting brackets are already installed, skip to
Step 13. If the brackets are not already installed, continue to
Step 11.
11. Align the four front mounting brackets with the screw holes on the
sides of the UPS and secure with 16 supplied M4 flat-head screws
(see Figure 19).
12. Align the two rear mounting brackets with the lowest two screw
holes on the sides of the UPS and secure with four supplied M4
flat-head screws.
Rear Mounting
Brackets (2)
S
®
Applications 164201715 Rev 2
Front Mounting
Brackets (4)