Eaton 9140 Installation Manual page 27

14. Secure the front of the cabinet to the rack as shown in Figure 7.
NOTE To install the optional seismic mounting brackets, the length of the rails must be
between 72 and 81 cm (28.5 and 32 inches).
15. If installing the optional seismic mounting brackets, align the two
EBM seismic mounting brackets with the screw holes on the sides
of the EBM above the rear mounting brackets. Loosely secure the
brackets with four supplied wing bolts. See Figure 8.
Do not tighten the wing bolts.
Figure 8. Installing the Optional EBM Seismic Mounting Brackets
®
Eaton 9140 (9910-E82/E83) UPS Installation Guide for IBM
Figure 7. Securing the Front of the EBM
®
Applications
INSTALLATION
Position 8 (M6 screw
and clip/cage nut)
Position 3 (M5 screw)
Position 2 (M5 screw)
S
164201715 Rev 2
www.eaton.com/ibm
11