Finishing The Fan Installation - NOMA 052-1196-4 Instruction Manual

1. Tilt the motor assembly up into position under the mounting
plate. Secure the plate to the mounting bracket with the 3
mounting bracket screws provided (see Fig. 7).
2. Unscrew the 4 motor housing screws from the side of the
mounting bracket.
3. Carefully lift the motor housing onto the mounting bracket,
properly align the holes and secure the motor housing with the
4 motor housing screws supplied (see Fig. 8).
Warning: Do not leave fan assembly unattended until
all four mounting bracket screws are engaged and
!
firmly tightened.

Finishing the Fan Installation

Mounting
plate
Motor
Mounting
bracket
Motor
housing
6
Mounting
bracket
Screws
Fig. 7
Screws
Fig. 8