1. Tilt the motor assembly up into position under the mounting
bracket. Secure the bracket to the plate with the 4 mounting bracket
screws provided. (Fig. 7)
2. Unscrew the 4 motor housing screws from the side of the
mounting bracket.
3. Carefully lift the motor housing onto the mounting plate,
properly align the holes and tighten the motor housing with the
4 motor housing screws supplied. (Fig. 8)
Warning: Do not leave fan assembly unattended until
all four mounting bracket screws are engaged and
!
firmly tightened.
Finishing the Fan Installation
Mounting
bracket
Motor
Mounting
plate
Motor
housing
6
Mounting
plate
Screws
Fig. 7
Screws
Fig. 8