Finishing The Fan Installation; Attaching The Fan Blades - NOMA Estate052-6964-6 Instruction Manual

52" (132 cm) ceiling fan

Hide thumbs

Table Of Contents

Table of Contents

Available languages

1. Tuck connections neatly into ceiling outlet box.

2. Slide the canopy up to the mounting bracket, align the

locking slots of the ceiling canopy with the two screws

in the mounting bracket. Push up to engage the slots, and

turn clockwise to lock the canopy in place.

3. Firmly tighten the two mounting screws.

4. Install the remaining two mounting screws into the holes

in the canopy and tighten firmly.

Warning: Make sure the tab on the hanging bracket

properly sits in the groove in the hanger ball before

attaching the canopy to the bracket by turning the

housing until it drops into place.

1. Attach the blade to the blade arm using the blade screws

as shown in Fig. 11.

2. Tighten each screw. Make sure the blade is straight.

3. Fasten one blade assembly to the motor using the two blade arm

screws and spring washers supplied (see Fig. 11).

4. Repeat this process with the other blades

Warning: To reduce the risk of personal injury, do not

bend the blade arms while installing, balancing the

blades, or cleaning the fan. Do not insert foreign objects

between rotating fan blades.