Test Mode - Yamaha CDX-E200 Service Manual

TEST MODE

Turning ON the POWER while pressing the keys "STOP" and "PLAY/PAUSE" will set to the TEST mode. (When
the TEST mode is set, all indicators light for 1 second.)
Note: When the power off, "STOP" key must be pressed before "PLAY/PAUSE" key pressd. Otherwise "PLAY/
PAUSE" key operation causes the product mode.
Test Mode Function List of Panel keys
PANEL KEY
OPEN/CLOSE Execute the test command selected with the SKIP/SEARCH keys
Plays if focus servo is effective. TRON, MUTE OFF.
PLAY/PAUSE
STOP All stop. (Focus, spindle, feed, laser, tray, etc.) Initializes FL display
T /E
T T T T E E E E
Increment the test command number.
(SKIP/SEARCH)
R /Y
R R R R Y Y Y Y
Decrement the test command number.
(SKIP/SEARCH)
Sample of display of test command
The functions corresponded to the test command numbers are as follows.
Command Command
No. Name
00 Op/Cl
01 AutoAdj 1
02 AutoAdj 2
03 AutoAdj 3
TV Rev
04
TV Fwd
05
06 TV Stop
07 SP Accel
08 SP Brake
09 SP SV.On
10 SP SV.Off
11 SP Stop
12 FO Search
13 TR,TV Off
14 1Kick Rev
15 1Kick Fwd
16 10 K. Rev
17 10 K. Fwd
18 30 K. Rev
19 30 K. Fwd
20 150K. Rev
21 150K. Fwd
22 PrdctMode
23 Error Msg
24 Test Eep
25 Check FL
Command Name
Command No.
02:AutoAdj 2
Tray open/close.
Auto adjustment mode 1 (TR-off set, FO-off set, FO-rough gain adjustment)
Auto adjustment mode 2 (TR-balance, TR-rough gain adjustment)
Auto adjustment mode 3 (FO-fine gain, TR-fine gain, FO-balance adjustment)
Move traverse reverse till the inner SW turn on.
Move traverse forward.
Stop traverse.
Accelerate spindle.
Decelerate spindle.
Spindle servo on.
Spindle free (servo off)
Stop spindle.
FOON, TROF (Enter focus search if focus servo is off.)
FOON, TROF, TVOF(FEOF) (Enter focus search if focus servo is off.)
Reverse 1 track kick continuously.
Forward 1 track kick continuously.
Reverse 10 tracks kick continuously.
Forward 10 tracks kick continuously.
Reverse 30 tracks kick continuously.
Forward 30 tracks kick continuously.
Reverse 150 tracks kick continuously.
Forward 150 tracks kick continuously.
Returns to product mode.
Display the latest error message. (see page 10)
Check EEPROM. (Mute on if test OK. Mute off if test NG)
Check FL display. (see page 9)
FUNCTION
FUNCTION
CDX-E200
8