Test Mode - Yamaha TSX-10 Service Manual

TEST MODE

STANDBY/ON Key is pressed while pressing INPUT Key and PRESET/TUNING
TEST MODE UP
PRESET/TUNING
Test mode number
up.
FL CHECK
DISPLAY
01 Fact.Test The factory inspection mode.
Do not use this mode.
02 DEST-R9k
Indication for destination. (*1)
03 FL+CLEAR
All FL segments and BACKUP RAM
CLEAR.
(Note that memories set by the user will
be erased.)
04 FL CHECK
All FL segments and circuit board short
circuit inspection.
05 FAN[Stop]
The test of the fan.
05 FAN[Low ]
05 FAN[High]
POWER Off condition
TEST MODE indication.
TEST MODE DOWN
PRESET/TUNING
Key
Test mode number
down.
1st
2nd
3rd
FUNCTION
Key.
When present mode is
carried out.
Key
PRESET/BAND Key
Execute test mode.
Test mode is finished.
PRESET/BAND Key
The choice of the factory inspection mode.
1st: all segments light
2nd: RAM CLEAR
Also, the preset contents of the tuner are
restored to the factory preset ones.
1st: all segments light
2nd: Even-numbered segments and even
numbered digits are turned on.
3rd: Odd-numbered segments and odd-
numbered digits are turned on.
Switching of Stop → Low → High.
TSX-10/15/20
STANDBY/ON Key
POWER OFF
The completion
of test mode.
10