Safety Warnings - Juniper ACX5048 Quick Start Manual

ACX5048 Universal Access Routers Quick Start

Safety Warnings

10
root> configure
Add a password to the root administration user account.
5.
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
(Optional) Configure the name of the router. If the name includes spaces, enclose the
6.
name in quotation marks (" ").
[edit]
root@# set system host-name host-name
Configure the default gateway.
7.
[edit]
root@# set routing-options static route default next-hop address
Configure the IP address and prefix length for the router management interface.
8.
[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
NOTE: The management ports, em0
FRU end of the ACX5048 router.
(Optional) Configure the static routes to remote prefixes with access to the
9.
management port.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-ip retain
no-readvertise
Enable Telnet service.
10.
[edit]
root@# set system services telnet
Commit the configuration to activate it on the router.
11.
[edit]
root@# commit
WARNING: This is a summary of safety warnings. For a complete list of
warnings, including translations, see the ACX5000 router documentation at
http://www.juniper.net/techpubs/
WARNING: Failure to observe these safety warnings can result in personal
injury or death.
and em1
(C0) (C1)
.
Copyright © 2015, Juniper Networks, Inc.
, are found on the