Using The Wwan Feature (Optional) - Getac RX10 User Manual

Using the WWAN Feature (Optional)

A WWAN (Wireless Wide Area Network) uses mobile telecommunication
cellular network technologies to transfer data. The WWAN module of your
Tablet PC supports 3G and 4G LTE.
NOTE:
Your model only supports data transmission. Voice transmission is not

supported.
For instructions on installing the micro-SIM card, see "Installing the

Micro-SIM Card (Optional) and Battery Pack" in Chapter 1.
Turning On/Off the WWAN Radio
To turn on the WWAN radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
•
Use the Airplane Mode button in the OSD Control Panel.
•
For Windows 10: Tap
Airplane mode. Slide the Airplane mode switch to the Off position.
2. If you have previously turned off the WWAN radio, use one of the below
methods to turn it on.
•
Tap and hold the Getac Utility icon
select Quick Bar. Tap the WWAN button in the Quick Bar (an X over
the button means the radio is currently off).
•
Use the WWAN utility.
•
For Windows 10: Tap
Airplane mode. Slide the Cellular switch to the On position.
 Settings  Network & Internet 
on Windows taskbar and
 Settings  Network & Internet 
21