Using The Wwan Feature (Optional); Turning On/Off The Wwan Radio - Getac T800 User Manual

Using the WWAN Feature
(Optional)
A WWAN (Wireless Wide Area Network) uses mobile telecommunication
cellular network technologies to transfer data. The WWAN module of your
Tablet PC supports 3G and 4G LTE.
NOTE:
Your model only supports data transmission. Voice transmission is not

supported.
For instructions on installing the SIM card, see "Installing the SIM Card

(Optional)" in Chapter 1.

Turning On/Off the WWAN Radio

To turn on the WWAN radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
•
Use the Airplane Mode button in the OSD Control Panel.
•
For Windows 8
Settings  Network  Airplane mode. Slide the Airplane mode
switch to the Off position.
2. If you have previously turned off the WWAN radio, use one of the below
methods to turn it on.
•
For Windows 8
Change PC Settings  Network  Airplane mode. Slide the Mobile
Broadband switch to the On position.
•
For Windows 7: Use the WWAN utility software or Getac Quick Bar.
To open Getac Quick Bar, tap and hold the Getac Utility icon
Windows taskbar and select Quick Bar. Tap the WWAN button in the
Quick Bar (an X over the button means the radio is currently off).
: Open the Charms Bar, tap Settings  Change PC
: Open the Charms Bar of Windows. Tap Settings 
23
on