Cisco Catalyst 4500 series Administration Manual page 1191

Chapter 46 Configuring 802.1X Port-Based Authentication
Local Policies:
Server Policies:
Method status list:
The following command displays the contents of the Filter-Id applied on the interface:
Switch# show ip access-list interface gi6/3
Guidelines for Per-User ACL and Filter-ID ACL
For per user ACL and Filter-ID ACL, the ACL source must be ANY
(permit TCP ANY host 1.1.1.1 eq 80 or permit TCP ANY host 1.1.1.1 eq 443).
OL_28731-01
Oper control dir: both
Session timeout: N/A
Common Session ID: 0A4046D50000009C0310AB47
Acct Session ID: 0x000000E7
Handle: 0xF3000061
Current Policy: POLICY_Gi2/9
Template: MYACL (priority 150)
Filter-ID: TEST-ACL
URL Redirect ACL:
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-51def075
Method State
mab Authc Success
deny ip host 20.20.0.2 host 155.155.155.156
deny ip host 20.20.0.2 156.100.60.0 0.0.0.255
deny tcp host 20.20.0.2 host 156.100.10.116 eq www
testacl
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Configuring 802.1X Port-Based Authentication
46-53