Cisco Catalyst 4500 series Administration Manual page 1181

Chapter 46 Configuring 802.1X Port-Based Authentication
Cisco ACS Configuration for DACL
Only Cisco ACS supports DACL.
Note
To ensure correct functioning of the ACS configuration required for DACL, follow these steps:
Configure a downloadable IP ACL on the window that appears when you select
Step 1
Radius Shared Profile > Downloadable IP ACL Content (Figure 46-10).
Figure 46-10
Attach this downloadable ACL with the USER on the window that appears when you select User >
Step 2
DACLs (Figure 46-11).
Figure 46-11
URL-Redirect
To configure URL-direct, you need to configure it on the ACS, and on the switch.
OL_28731-01
Shared Profile Components
Downloadable ACLs
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Configuring 802.1X Port-Based Authentication
46-43