Cisco Ios Carries Ethernet Features In Cisco Ios Xe 3.1.0Sg - Cisco Catalyst 4500 series Administration Manual

Chapter 31 Configuring LLDP, LLDP-MED, and Location Service
Command
show lldp entry entry-name
s
show lldp error
show lldp interface [interface-id]
show lldp neighbors [interface-id]
[detail]
show lldp traffic
show location
show nmsp
show power inline interface [detail]
show power inline module mod
[detail]

Cisco IOS Carries Ethernet Features in Cisco IOS XE 3.1.0SG

This section provides a list of High Availability software features that are supported in Cisco IOS XE
3.1.0SG. Links to the feature documentation are included.
Feature guides may contain information about more than one feature. To find information about a
specific feature within a feature guide, see the Feature Information table at the end of the guide.
Feature guides document features that are supported on many different software releases and platforms.
Your Cisco software release or platform may not support all the features documented in a feature guide.
See the Feature Information table at the end of the feature guide for information about which features in
that guide are supported in your software release. Use Cisco Feature Navigator to find information about
platform support and Cisco software image support. To access Cisco Feature Navigator, go to
http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
ANSI TIA-1057 LLDP-MED Support and IEEE 802.1ab LLDP (Link Layer Discovery Protocol)
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lldp-med.html
OL_28731-01
Description
Displays information about a specific neighbor.
You can enter an asterisk (*) to display all neighbors, or you can enter the name
of the neighbor about which you want information.
Displays LLDP computational errors and overflows.
Displays information about interfaces where LLDP is enabled.
You can limit the display to the interface about which you want information.
Displays information about neighbors, including device type, interface type and
number, holdtime settings, capabilities, and port ID.
You can limit the display to neighbors of a specific interface or expand the display
to provide more detailed information.
Displays LLDP counters, including the number of packets sent and received,
number of packets discarded, and number of unrecognized TLVs.
Displays the location information for an endpoint.
Displays the NMSP information.
Displays detailed information on the PoE status for the interface
Displays detailed information on the PoE consumption for the specified module.
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Cisco IOS Carries Ethernet Features in Cisco IOS XE 3.1.0SG
31-15