Disassembly and Reassembly
3-2 Disassembly and Reassembly (cont.)
3-2-3 Disconnecting the Power Supply
No.
3
Caution
To perform additional internal repair service after remov-
ing the panels, be sure to cut off the power supply first.
To disconnect the power supply, remove the cabinet-
Front and then remove the Control Box cover.
Unfasten the seven screws on the Control Box cover.
The Control Box cover does not fall off the device even when
the screws are unfastened, due to the supportive tab at the top.
As shown in the image, pull the lower part of the cover while
holding the lower part and remove the cover from the support-
ive tab.
Then pull up the cover to remove it.
- The power connection box is attached to the lower part
of the Control Box.
- The power connection box is protected by the metal
cover to ensure safety.
Samsung Electronics
Work Procedure
Remark
Control Box
Control Box
Supportive tabs
2
1
Power connection box
43