Rev 4 Nov.16
· Solid Orange—1000 Mbps (Gigabit)
· Off—10/100 Mbps
Step 7—Configure the Software
You can configure the ALEOS software on the MP70 using:
•
ACEmanager
(browser-based application)
•
AirLink Management Service
•
oMM Management System (unified software platform deployed in the enter-
prise data center)
•
AT Commands
Configuring with ACEmanager
To access ACEmanager:
1. Connect a laptop to the router with an Ethernet cable.
2. Launch your web browser and go to http://192.168.13.31:9191.
Note: It takes the router about 1 minute to respond after power up.
Figure 2-17: ACEmanager login window
3. Enter the default password, 12345 and click Log In.
4. Refer to the ALEOS Software Configuration User Guide for information on
how to use ACEmanager to configure your MP70.
Configuring with AirLink Management Service
AirLink Management Service (ALMS) allows remote management of all your
routers from one user interface.
Some of its features include:
•
Centralized, remote monitoring for all your AirLink routers
•
Continuous status monitoring of important health data such as signal strength
•
Location monitoring, including world map views
•
Complete ALEOS reporting and configuration, including historical views of
ALEOS information
•
Configure individual routers or use templates to perform batch configurations
of your AirLink routers
•
Single click over-the-air firmware updates to all your routers
29
Installation and Startup
(cloud-based application)
4119008