GE MI-869 Instruction Manual page 54

ELECTRICAL INSTALLATION
FASTPATH:
2–10
Figure 2-11: Typical wiring diagram
G1 G2 G3 G4 G5
The TRIP output relay mode depends on the Breaker/Contactor selection. If the selection is
"Breaker" the relay is in a non-failsafe mode, if the selection is "Contactor" the relay is in a
failsafe mode.
G6 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G18 G19 G20 G21 G22 G23 G24
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: INSTALLATION