Table of Contents
Advertisement
CHAPTER 3: INTERFACES
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
•
Click on Trigger Waveform to trigger a waveform capture.
•
To view the captured waveforms, click on the Launch Viewer button. A detailed
Waveform Capture window appears as shown below.
•
Click on the Save button to save the selected waveform to the local PC. A new window
appears, requesting the file name and path. One file is saved as a COMTRADE file, with
the extension "CFG." The other file is a "DAT" file, required by the COMTRADE file for
proper display of waveforms.
•
To view a previously saved COMTRADE file, click the Open button and select the
corresponding COMTRADE file.
SOFTWARE INTERFACE
3–37
Advertisement
Table of Contents
