Machinery Directive; Ec Declaration Of Conformity - Stanley SCH12 Original Instructions Manual

ENGLISH
(Original instructions)
SERVICE INFORMATION
STANLEY offers a full network of company-owned and authorized
service locations. All STANLEY Service Centers are staffed with
trained personnel to provide customers with efficient and reliable
power tool service. For more information about our authorized
service centers and if you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY location
nearest you.
TWO YEARS WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all original
components;
• The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in the
STANLEY catalogue or contact your local STANLEY office at the
address indicated in this manual. A list of authorised STANLEY
repair agents and full details of our after sales service is available
on the internet at: www.2helpU.com
12

EC declaration of conformity

MACHINERY DIRECTIVE

SCH12 - Hammer Drill
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC,
EN 60745-1:2009 + A11:2010, EN 60745-2-1:2010
These products also comply with Directive 2004/108/
EC (until 19/04/2016) 2014/30/EU (from 20/04/2016)
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
01.2016