Canon imageRUNNER 1750 Copying Manual page 74

4
NOTE
• The default setting is '3/4" (18 mm)'. You can adjust the frame erase width to between
3/16" and 13/16" (3 mm and 20 mm).
• To enter values in millimeters, press [mm]. (See Chapter 3, "Configuring the Machine's
Basic Settings," in the Reference Guide.)
5
Enter the desired copy quantity (from 1 to 999) using
(numeric keys).
6
Press (Start).
Copying starts.
NOTE
• To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard Settings, press
(Reset).
Press [-] or [+] to set the frame
erase width ➞ press [OK] ➞
[Done].
The display returns to the top screen.
Erasing Shadows/Frame Lines (Frame Erase)
3
-
3-19