3
3
4
Press [-] or [+] to set the frame erase widths.
NOTE
• The default settings are '1/8" (4 mm)' for each side and '3/8" (10 mm)' for the center.
You can adjust the frame erase width to between 1/16" and 1 15/16" (1 mm and
50 mm).
• To enter values in millimeters, press [mm]. (See Chapter 3, "Configuring the Machine's
Basic Settings," in the Reference Guide.)
● If you want to set the same width for all four borders:
3-16
Erasing Shadows/Frame Lines (Frame Erase)
Select the size of the bound
original when it is open ➞ press
[Next].
IMPORTANT
You can set the Book Frame Erase
mode only for the original paper sizes
shown on the touch panel display.
NOTE
To select the paper size in A or B
series, press [A/B-size].
❑
Press [Center] and/or [Sides] ➞ press [-]
or [+] to set their respective frame erase
widths ➞ press [OK].