Collating Or Stapling Copies - Canon imageRUNNER 1750 Copying Manual

Collating or Stapling Copies

1
2
Select the desired collating mode.
● If the optional Staple Finisher-H1 is not attached:
● If the optional Staple Finisher-H1 is attached:
Place your originals ➞ press
[Finishing].
IMPORTANT
To achieve the desired outputs, make
sure that your originals are placed in
the correct orientation. (See "Placing
Orientations of Originals," on p. 5-2.)
❑
Press [Collate] or [Group].
❑
Press [Collate], [Group], or [Staple].
❑
For the Collate or Group mode, enable or
disable the Offset mode by pressing
[Offset]. When the Offset mode is
enabled, the key turns black.
• If you select [Collate] or [Group],
proceed to step 3.
• If you select [Staple], press [Next].
2
2-27
Finishing