Canon imageRUNNER 1750 Copying Manual page 43

1
2
2
NOTE
• You can also use
entry.
• You can reset the copy ratio to 100% by pressing
or pressing [Direct] on the top screen.
• If you enter a value outside the setting range and press [Done], a message prompting
you to enter an appropriate value appears on the touch panel display.
3
Enter the desired copy quantity (from 1 to 999) using
(numeric keys).
4
Press
Copying starts.
2-16
Enlarging/Reducing Images
- (numeric keys) to enter a value, and
(Start).
Place your originals ➞ press
[Copy Ratio].
Use [-] or [+] to set the copy ratio
➞ press [Done].
(Clear) to clear your
(Clear) instead of entering '100',
-