Specifications - Panasonic SA-BT222EB Service Manual

4 Specifications

Main unit SA-BT222EB/EG
GENERAL
Power supply:
iPod/iPhone Connector:
Power consumption:
Power consumption in standby mode:
Dimensions (W×H×D):
Mass:
Operating temperature range:
Operating humidity range:
AMPLIFIER SECTION
RMS TTL Power Output:
1 kHz, 10 % total harmonic distortion
Front:
100 Hz, 10 % total harmonic distortion
Subwoofer:
DIN TTL Power Output:
1 kHz, 1.0 % total harmonic distortion
Front:
100 Hz, 1.0 % total harmonic distortion
Subwoofer:
Audio input
AUX
Digital audio input
Optical:
Sampling frequency:
Audio Format:
FM TUNER SECTION
Present Memory:
Frequency range:
Antenna terminals:
VIDEO SECTION
Signal system:
Video output
Output level:
Output connector:
HDMI AV output
Output format:
480p(525p)/ 1080i(1125i)/ 720p(750p)/ 1080p(1125p)
Output connector:
This unit supports "HDAVI Control 5" function.
LASER Specification
Class I LASER Product
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous radiation is emitted with the safety protection
TERMINAL SECTION
USB:
(Front)
USB Port Power:
Bit Rate:
SD card slot:
AC 220 V to 240 V, 50 Hz
DC OUT 5V 500mA MAX
Approx. 0.2 W
430 mm×54 mm×287 mm
Approx. 3.0 kg
0 °C to 40 °C
35 % to 80 % RH
(no condensation)
125 W per ch (3 Ω)
250 W per ch (6 Ω)
100 W per ch (3 Ω)
110 W per ch (6 Ω)
32 kHz, 44.1 kHz, 48 kHz
PCM, Dolby Digital
87.50 MHz to 108.00 MHz (50 kHz step)
75 Ω (unbalanced)
PAL 625/50, PAL 525/60,
1.0 Vp-p (75 Ω)
Pin jack (1 system)
Type A (19 pin)
HDMI (V.1.4, Content Type)
Max 500 mA
Up to 4Mbps (DivX)
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
90 W
Refer to their respective original service manuals for *1.
500 W
310 W
x1
x2
30 Stations
NTSC
13
Connector : 1 system