Table of Contents
Advertisement
4 Specifications
GENERAL
Power consumption:
Power consumption in standby mode:
Power supply:
Dimensions (W x H x D):
(Without wall mount bracket)
(With wall mount bracket)
Mass (Weight):
(Without wall mount bracket)
(With wall mount bracket)
Operating temperature range:
Operating humidity range:
AMPLIFIER SECTION
RMS Output Power
Front ch:
Subwoofer ch:
Total RMS Dolby Digital mode power:
FTC Output Power
Front ch:
Subwoofer ch:
Total FTC Dolby Digital mode power:
SPEAKER SECTION
FRONT SPEAKERS (BUILT-IN)
Type:
Full range:
SUBWOOFER (BUILT-IN)
Type:
Woofer:
TERMINAL SECTION
HDMI
HDMI input
Input Connector:
HDMI AV output
Output Connector:
Digital Audio Input
Optical digital input:
Sampling frequency:
Audio Format:
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
800 mm x 108 mm x 58 mm
(31 1/2" x 4 1/4" x 2 9/32")
800 mm x 108 mm x 80 mm
(31 1/2" x 4 1/4" x 3 5/32")
Approx. 3.2 kg (7.1 lbs)
Approx. 3.3 kg (7.3 lbs)
0°C to +40°C (+32°F to +104°F)
20% to 80% RH (no condensation)
30 W per channel (4 Ω), 1 kHz, 10% THD
30 W per channel (4 Ω), 100 Hz, 10% THD
20 W per channel (4 Ω), 120 Hz to 20 kHz, 1% THD
20 W per channel (4 Ω), 40 Hz to 120 Hz, 1% THD
1 way 1 speaker system (Bass Reflex)
6.5 cm (2 1/2") Cone type x 2
1 way 1 speaker system (Bass Reflex)
8 cm (3 1/8") Cone type x 2
This unit supports "HDAVI Control 5" function.
32 kHz, 44.1 kHz, 48 kHz
10
25 W
Approx. 0.1 W
AC 120 V, 60 Hz
120W
80 W
Type A (19 pin)
Type A (19 pin)
Optical terminal
LPCM, Dolby Digital
Advertisement
Table of Contents
